Home > News > Content
Artificial Garden Grass Prosperous Development Period
May 26, 2017

With the development of society, Artificial Garden Grass is constantly innovating, and the natural lawn used in roof greening is gradually replaced by Artificial Garden Grass. In foreign countries, the Germans built the building into a ladder-style residential complex, using Artificial Garden Grass to build a variety of roof garden, many of them using a multi-color Artificial Garden Grass, from the top of the sky like a colorful giant carpet, very pleasing. Australia, Britain, Italy and other countries of the big cities, there are thousands of Artificial Garden Grass roof garden. At present, China's Artificial Garden Grass roof greening has gradually entered the flourishing period of development.

  Lawn as part of the landscape, the application of the garden is very extensive, adding design elements of the lawn, no longer just a simple grass, they have life, with language, with poetic, with imagination ... ...

1, glue: the requirements of the brush at the bottom of its lawn thick uniform thickness, can not be repeated coating, or cause blistering phenomenon, or even fall off, strictly control the thickness of glue, pay attention to the appropriate glue, were applied to be bonded Of the two bonding surfaces.

2, bonding: according to the then temperature, humidity and other conditions reasonable control dry time, generally 10-15 minutes to glue is appropriate, mortar to eighty-nine into dry to touch non-stick is appropriate. Bonding requires a one-time alignment. Do not move the bonded object back and forth after bonding.

3, the pressure: after the removal of its surface debris, with a special rubber hammer from the adhesive on both sides of the force hammer, so that the surface of the full adhesion of dense and more solid.

4, curing its curing time is generally three days, the final strength is generally measured for ten days. Therefore, during the curing should pay close attention to its maintenance, to avoid too much sun, water invasion and movement, in order to achieve the best state of bonding.

5, after bonding in the absence of quartz sand and rubber particles before the site of the debris cut for cleaning.